News    Imprint   

Visibility Field Standards
The visibility field of a vehicle is an important criterion during the development process and during operation. If the required visibility field is not met, the machine cannot be approved and operated by the end customer. EMM-Check enables you to analyze the visibility field of your vehicles based on CAD-Data during the whole development process and therefore ensures the final approval. EMM-Check support various standard for various vehicle types.

Results from ISO 5006:2006 Maskings according to ISO 5006:2006
Results from ISO 5006:2017 Maskings according
to ISO 5006:2017

Classification of standards/directives /regulations:
EMM-Check supports various visibility field relevant standards, derectives and regulations for different types of vehicles as listed below:
Standard
Directive
Regulation
analyzed view vehicle-/machinetype
direct indirect 1) Earth Moving Machine Agricultural Machine Fork Lift Truck
ISO 5006:2006
ISO 5006:2017
ISO 14401:2004
ISO 14401:2009
StVZO §35b, Abs. 2, Richtlinie 11 2)
ECE R46 2)
HSE-Dokument
ISO 5721 Teil 1
ISO 5721 Teil 2
ISO 13564-1
DIN EN 16307-1:2013
ANSI/ITSDF B56.11.6-2013 (in preparation)
DIN EN 16842 (Final Draft / in preparation)
DIN EN 15830:2012 2)
1) e. g. through a mirror and/or a camera/monitor system
2) for telescopic handlers and fork lift trucks having a mass of more than 10t


ISO 5006:2017
Visibility check: direct, indirect
Vehicle types: Earth Moving Machinery
  • Evaluation of visible areas on a 12m radius test cricle:
    • Calculation of the number and size of maskings on the test circle for each sector
    • Allowed number and size of maskings dependant from vehicle type and operating mass
  • Evaluation if visible area with in the close area around the vehicle (Rectanguar Boundary, RB)
    • Calculation of the maximum intersection line of maskings and RB at a height of 1.50m
    • If criteria are not fulfilled, evaluation if the visible area between the top edge of the RB an the floor
Maskings Top view Report
Maskings according
to ISO 5006:2006
Top view Overview of maskings
in report
StVZO §35b, Abs. 2, Richtlinie 11
Visibility check: direct
Vehicele types: Earth Moving Machinery, Agricultural Machinery, Fork Lift Trucks
  • Evaluation of maskings in on a semi-circle to the front
  • Standard check and speed dependant additional checks including check of maximum length of the vehicle to the front (if needed)
Maskings Criteria Report
Maskings according
to StvZO §35b Abs.2 Rili 11
Test criteria Extract from report
ISO 14401:2004 / ISO 14401:2009
Visibility check: indirect
Vehicle types: Earth Moving Machinery
  • Evaluation of mirror and/or camera visibility fields
  • Dependant from vehicle type and operating mass
  • Behind the vehicle on near back plane and on 30m view line (ISO 14401:2004 and ISO 14401:2009)
  • On a plane in front of the right front wheel or crawler chain (only ISO 14401:2004)
View requirements Analysis results Analysis results
Test environment ISO 14401:2009 Analysis results Analysis results
(Close up)
HSE-Document (Health and Safety Executive, UK)
Visibility check: direct, indirect
Vehicle types: Earth moving machinery
  • HSE = Health And Safety Executive, responsible for the encouragement, regulation and enforcement of workplace health, safety and welfare
  • The HSE propagates a "visibility map" documenting the visible areas and blind spots around a vehicle
  • The "visibility map" has to be created through moving a test body around a vehicle and check it's visibility at any position
  • It shall be provided by manufacturers as part of the operating manual and can be taken into account within a risk assessment
Maskings Test body Report
Maskings according
to HSE
Settings of
test body
Extract from report

DIN EN 15830:2012
Visibility check: direct, indirect
Vehicle types: Earth Moving Machinery, Fork Lift Truck
  • Evaluation of the masking on a test cricle and the rectangular boundary (comparable with ISO 5006:2006)
  • In addition vertical maskings on cylindrical surfaces in sector A and C will be evaluated
  • Evaluation of the visibility of the fork tips (or load platform)
  • Test profiles for vehicles without load, with load on forks, with attached load and when putting a load on a truck (loading edge)
Cylindrical Surfaces Results of DIN EN 15830 Selection of a test load
Cylindrical surfaces
in sector A and C
Results of DIN EN 15830 Selection of a test load
ECE R46
Visibility check: indirect
Vehicle types: Earth Moving Machinery, Agricultural Machinery, Fork Lift Trucks
  • european directive for evaluation of the indirect view through mirrors and cameras for cars, busses and trucks
  • the StVZO points to the ECE R46
Test environment of ECE R46 Positioning of a front mirror Results of ECE R46
Test environment of ECE R46 Positioning of a front mirror Results of ECE R46
ISO 5721 Part 1
Visibility check: direct
Vehicle types: Agricultural Machinery
  • Evaluation of maskings on the semi-circle to the front
  • Standard check and speed dependant additional checks including check of maximum length of the vehicle to the front (if needed)
  • partially comparable with StVZO §35b Abs.2, Richtlinie 11
Maskings Components wider than 80mm Analysis results
Masking and wiper area
according to ISO 5721-1
Components wider
than 80mm
Results of an analysis
ISO 5721 Part 2
Visibility check: direct, indirect
Vehicle types: Agricultural Machinery
  • Evaluation of the visible areas at 1m height left and right beside and behind the vehicle
  • If dirdct view is not sufficient, evaluation of mirror and camera visibility fields
  • Standard test, no additional checks
Analyseergebnisse Analyseergebnisse Bericht
Analysis results
ISO 5721-1 / 2
Analysis results Extract of report

ISO 13564-1
Visibility check: direct
Vehicles types: Fork Lift Trucks
  • Evaluation of the visible areas on a test screen in front of the vehicle and on a test body moved along defined tracks around the vehicle
  • Test for driving and manouvering incl. mast tilt
  • Evaluation of the view on the fork tips or load platform
  • Test profiles for vehicles with seated driver or standing driver
Environment ISO 13564 Results View on forks
Test environment
of ISO 13564
Results according
to ISO 13564
View on the fork tips
DIN EN 16307-1:2013
Visibility check: direct
Vehicles types: Fork Lift Trucks
  • Evaluation of the visible areas on a test screen in front of the vehicle and on a test body moved along defined tracks around the vehicle
  • Test for driving and manouvering incl. mast tilt
  • Evaluation of the view on the fork tips or load platform
  • Test profiles for vehicles with seated driver or standing driver
Data check DIN EN 16307 Tracks Evaluation of Test 4
Data pre-check DIN EN 16307 Test tracks Evaluation of Test 4
DIN EN 16842
Visibility check: direct / indirect
Vehicle types: Fork Lift Trucks

in preparation
ANSI/ITSDF B56.11.6-2013
Visibility check: direct
Vehicle types: Fork Lift Tucks

in preparation



© 2008-2018, REKNOW GmbH & Co. KG

NEWS
9th of February 2018, EMM-Check Release 4.2.5.0
On 9th of February 2018 we will release the version 4.2.5.0 of EMM-Check. This version will contain many enhanced and new functions as well as modifications in some of the standards.

11th of December 2017, EMM-Check Release 4.2.4.1
On 11th of December 2018 the new version 4.2.4.1 was released. The new version contain several bugfixes. You can find more details here.

1st of September 2017, New office opened!
REKNOW was able to grow continuously over the past years due to increasing revenues from EMM-Check. This success shows up in the opening of an additional office in Hamburg. The new office provides space for new colleagues and can be used for presentations to our customers.